Plug-in arrester V10 280 V
Item no. 5093402 | EAN 4012195012825
- Product description
-
Product description
Surge arrester, type 2+3 to EN 61643-11
• Plug-in upper part; upper part can be separated from base without tools
• Incl. thermal and dynamic cut-off unit and visual display of defects
• High current conductivity and long service life
-
- Technical data
-
Connectivity options
Arrester surge current (8/20 µs) [total] 10 kA Blow-out no Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm² Conductor cross-section, rigid (single-wire/multiwire), min. 2,5 mm² Dimension 280V Installation type On basic element Lightning protection zone LPZ 1→3 Max. mains-side overcurrent protection 125 Maximum back-up fuse 125 A Maximum continuous voltage AC 280 V Maximum discharge current (8/20 μs) 20 kA Network form Other Nominal discharge current (8/20 µs) 10 kA Nominal voltage AC (50/60 Hz) 230 V Operating temperature, max. 80 °C Operating temperature, min. -40 °C Pole version 1 Protection rating IP20 Remote signalling no Response time <25 ns Signalling on device Visual SPD to EN 61643-11 Type 2+3 SPD to IEC 61643-1 Class II+III Test class, type 2 yes Version for 1-pole - All types
- Downloads
-
Data sheet V10-C 0-280 / 5093402 , 0.22MB , pdfREACH Declaration of conformity V10-C 0-280 / 5093402 , 0.12MB , pdfRoHS Declaration of conformity V10-C 0-280 / 5093402 , 0.12MB , pdfNo invitation to tender text is available for this product.
