PV combination arrester V25, 900 V DC
Item no. 5097447 | EAN 4012195478683
- Product description
-
Product descriptionV25 combination arrester, type 1+2, for photovoltaic systems
• Complete unit, consisting of plug-in varistor arrester with cut-off unit
• Error-resistant Y circuit to VDE 0100-712 (EN 50539-12)
• Surge protection equipotential bonding to VDE 0100-443 (IEC 60364-4-44)
• Arresting capacity up to 7 kA (10/350) and 50 kA (8/20) per pole
• Low DC protection level: < 3.0 kV and Voc max = 900 V DC
• With visual function display for use in distributor housings
Application: PV systems with lightning protection system
-
- Technical data
-
Technical data
Blow-out no Cable type for surge protection devices Power cable DC (PV) Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm² Conductor cross-section, rigid (single-wire/multiwire), min. 2,5 mm² DC network form yes Dimension 900V DC Installation type DIN rail 35 mm IT network form no Lightning protection zone LPZ 0→2 Lightning surge current (10/350 μs) 7 kA Max. mains-side overcurrent protection 160 Maximum back-up fuse 160 A Maximum continuous voltage DC 900 V Maximum discharge current (8/20 μs) 50 kA Network form DC Nominal discharge current (8/20 µs) 30 kA Nominal discharge current (8/20 µs) [L-N] 30 kA Operating temperature, max. 80 °C Operating temperature, min. -40 °C Other network form no Pole version 3 Protection rating IP20 Remote signalling no Response time <25 ns Signalling on device Visual SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 Class I+II TN network form no TN-C network form no TN-C-S network form no TN-S network form no TT network form no Version for 3-pole for PV systems - All types
- Downloads
-
Data sheet V25-B+C 3-PH900 / 5097447 , 0.25MB , pdfEU declaration of conformity V25-B+C 3-PH900 / 5097447 , 0.10MB , pdfREACH Declaration of conformity V25-B+C 3-PH900 / 5097447 , 0.12MB , pdfRoHS Declaration of conformity V25-B+C 3-PH900 / 5097447 , 0.13MB , pdfSelection aid Selection aid, surge protection , 2.00MB , pdf
